Why Upgrade?

Elevate your cooling technology
Embrace summer with joy, as long as your air conditioner remains steadfast. An undependable, outdated AC system can wreak havoc on your business, causing discomfort, draining your finances with frequent repairs, increasing energy expenses, and even violating new environmental regulations. However, present-day cooling technology offers a superior solution for your business, benefiting your building, the environment, and ultimately, your financial prosperity.

Elevate Refrigerant
Most older ACs contain R22, an ozone-depleting refrigerant. Today’s systems contain new low GWP alternative refrigerants that are more efficient as well as being considered to cause lower environmental impact as required by both national and international regulations.

Elevate Energy Efficiency
Offering superior EER and IEER rated equipment will assist in controlling and lowering energy costs compared to older models.

Elevate Fans
In the past, ACs only had one speed: maximum, resulting in overworked equipment. Variable speed technology operate on speeds that are best suited for actual indoor conditions to provide superior comfort levels.

Elevate Compressors
Older ACs typically have a single-stage compressor that can only operate at full capacity. Newer systems have dual-stage compressors or variable capacity that provides both greater comfort levels as well as possibly leading to lower energy consumption.

Elevate Ductless Heating & Cooling
Installing ductwork can be an expensive challenge. Ductless mini-splits are a great option for cooling spaces without ducts, with non-invasive installation and small air handlers in each room.

Environmental Impact

Is your AC over 10 years old? It’s time to upgrade

  • Most AC units older than 10 years use R22, a harmful ozone-depleting refrigerant.
  • Once released into the atmosphere, R22 causes irreversible damage to the environment.
  • R22 has slowly been phased out globally, with a complete ban going into effect January 1, 2020.
  • Once illegal, R22 can no longer be manufactured or imported into the country.

Don’t wait until an irreparable breakdown – we’re here to help

  • If your AC system requires R22 and breaks  down the cost and availability of R22 may lead to an expensive repair on older outdated equipment. In some cases, a refrigerant “replacement” may be available, however, this may lead to an expensive short-term or temporary solution.

  • Elevate has your solution by offering cost-effective and energy-efficient alternatives to typical cooling and heating equipment units from packaged Rooftop Units with variable capacity compressors and motors, ensuring efficient and precise temperature control, to ductless split systems with non-intrusive installation and zone control while using equipment with code required EER and IEER ratings.

  • From packaged Rooftop Units with variable speed for efficient and precise temperature control, to ductless split systems like Variable Refrigerant Flow, with non-intrusive installation and zone control heating and cooling, we have your solution.

Featured Products

Whatever your business, we have your cooling system
A new and properly-sized cooling system matched to the unique needs of your business will not only keep you comfortable, but it can also help you save on your energy bills

Carrier WeatherExpert 48

  • Available with 3 to 23-ton cooling capabilities
  • Ultra-high efficiency model with SEERs up to 17.5
  • Multi-stage compressors and VFDs for better control and energy savings8
  • Recommended for: Restaurants, Multi-Residential buildings, Retail spaces

Daikin VRV IV

  • Available with 6 to 34-ton cooling capabilities
  • Heats and cools simultaneously
  • Integrated Energy Efficiency Ratio (IEER) up to 28
  • Design flexibility with piping lengths up to 3,280 ft total and 100 ft. vertical separation between indoor units9
  • Recommended for: Multi-Residential buildings, Large Commercial spaces

Heating Rooftop Units

A Roof Top Unit (RTU), serving as an outdoor, roof-mounted air-handling unit, plays a crucial role in providing heating, ventilation, air conditioning and filtration to the building it serves. RTUs are a vital component of the central ventilation system, effectively circulating air throughout the space. These units are commonly used in low-rise commercial establishments, such as multi-level residential, medical facilities, restaurants, warehouses, and offices. RTUs have been trusted and the go-to equipment for decades ensuring optimal indoor climate control for all your commercial needs.

Why replace your RTU:

Our team of certified commercial HVAC specialists are equipped to conduct comprehensive inspections of your RTU, enhancing comfort and efficiency. By utilizing the numerous advantages and benefits and options when replacing your RTU, employees, customers and owners will all benefit.

When to Elevate your RTU:

  • Higher Electricity Bills Than Normal

  • Odd Noises Coming from the RTU

  • Costly HVAC repairs

  • Frequent untimely breakdown

  • Dissatisfaction due to temperature, humidity and ventilation issues

Industry List:

Strip Plazas

Tech highlights:

Experience the advantages of high-efficiency rooftop units (RTUs) available in cooling only, heating/cooling, heat pump/electric, condensing (gas heat) and ductless versions.

This equipment is typically located on the roof, in a non-mechanical room atmosphere therefore they built to withstand the harsh outdoor environment. Being on the roof also allows for service and maintenance to be done without interruption to customers/clients in the building. RTUs can also provide the ability to single zone or multi-zone a building depending on the equipment size with interconnected HRV/ERV ventilation equipment.

New environmental regulations are moving RTUs to be more environmentally safer, while energy efficiencies standards are driving the equipment to be more efficient with added technologies making them more reliable and when necessary serviceable.


Your commercial water heating system plays a crucial role in the functioning of your business, providing potable water for cooking, and sanitation purposes such as dishwashing and handwashing. In some cases, it even facilitates space heating through a heat exchanger.

Natural Resources Canada estimates that just under 6% of energy consumed in a typical commercial building is directly connected to hot water usage.

Age and lack of regular maintenance are often the leading factors in water heater failure, resulting in temperature inconsistencies, slow heating (recovery times), possible noises transmitted through the piping system, and water that is dirty, rusty, or has an unpleasant odor or in a worst case scenario – leaks leading to high dollar damages.

Elevating and investing in a water heater or system upgrade, one can enjoy numerous benefits compared to older models with respects to improved efficiency, reliability, performance, comfort, safety and reducing concerns regarding water damage concerns.

How to choose the right water heater and/or system:

When choosing a hot water tank or system for your business, it’s important to consider several key factors and considerations:

  1. Available space: determine the area where your current tank is located and account for plumbing, electrical, and gas connections.

  2. Tank size: determine if the current hot water system meets your needs. If you frequently run out of hot water, it must be determined if the existing system requires upgrading or up sizing. Tanks are measured in (litres or gallons) and heating power (BTUs – British thermal units) and water flow rates.

  3. Energy efficiency: Consider your energy efficiency requirements. Some tanks are ENERGY STAR® certified and offer increased insulation for better energy conservation.

  4. Conversion: Decide if switching to an alternate fuel may be an option when replacing an existing system: ie. electric to gas, electric element to heat pump style.

  5. Venting options: Determine the venting requirements and consider the various equipment venting options to ensure that codes are met.

By considering these factors, you can make an informed decision when selecting the right hot water heating system for your business. 

Commercial HVAC Repair Service

Ensure maximum operational efficiency and uninterrupted operations by contacting us today. Welcome back a sense of comfort and satisfaction as you leave prevent and reduce equipment failures that disrupt your operations. Our customer center is available 24/7/365, ready to assist scheduling any service call. Whether you require emergency service, regular maintenance, our dedicated support agents will promptly dispatch a technician to your location. With a team of licensed technicians and a network of reliable contractors, we possess the expertise to diagnose and resolve issues swiftly, ensuring your equipment is up and running in no time. Trust us to provide efficient and effective solutions for all your equipment needs.

Commercial Heating and Cooling Protection Plan

Safeguard your business from unexpected repair expenses and enhance the performance of your HVAC system with our Commercial Heating and Cooling Protection Plans. By enrolling in one of our plans, you can enjoy the benefits of $0 parts and labor on your next repair, ensuring cost savings and peace of mind. Our skilled technicians go beyond repairs and provide comprehensive maintenance services, including filter replacements, general operational and safety checkups, as well as equipment cleaning and maintenance.

Water Heater Repair

When our skilled service technicians visit your building for water heater maintenance, you can expect them to perform the following tasks:

  1. Drain and clean the water heater: Removing any sediment buildup or debris that may affect the efficiency and performance of the water heater.
  2. Flush sediment from the tank: Flushing out accumulated sediment from the tank to improve water quality and prevent potential issues.
  3. Inspect the anode rod: Assessing the condition of the anode rod, which helps prevent corrosion within the tank and extends the lifespan of the water heater.
  4. Inspect the pressure relief valve: Checking the pressure relief valve to ensure it is functioning correctly and can safeguard against excessive pressure buildup.
  5. Check the thermostatic controller: Verifying the accuracy and proper functioning of the thermostat, which controls the water temperature and ensures optimal performance.


By conducting these essential maintenance tasks, our technicians help ensure your water heater operates efficiently, providing a reliable supply of hot water for your business needs. Rest assured that your water heater is in capable hands, allowing you to focus on your business with peace of mind.

Commercial Hot Water Protection Plan

Experience the benefits of our Commercial Hot Water Protection Plan by signing up today. When you enroll, you’ll receive $0 parts and labor on your next repair, providing you with cost savings and added convenience. Our dedicated technicians go beyond repairs and offer comprehensive services to optimize the performance of your water heating system. They conduct general operational and safety checkups, ensuring that your equipment operates efficiently and meets safety standards. Additionally, our skilled specialists will thoroughly inspect your water heating system, addressing any issues by cleaning, repairing, or replacing problematic parts. Rest assured that your system will be restored to peak performance, providing reliable hot water for your business needs. Invest in our Commercial Hot Water Protection Plan and enjoy the peace of mind that comes with a well-maintained and efficient water heating system.